Before using the smart plug, the computer motherboard must support the AC recovery function (AC recovery )
That is, the system will automatically start after the computer is powered on, so as to realize the remote start function.
- Enter the motherboard BIOS
NOTE: Different motherboards vary, if you do not have access, please contact the motherboard manufacturer for assistance.
- Automatic start after power failure
Computers with AC Recovery or AC Power Recovery function under the BIOS power management menu can support automatic power-on after power failure.
If your computer does not have this feature, it is not supported.
In most cases, set the following settings in Power Management :
AC Recovery, AC Power Recovery, After Power Loss, AC BACK
( Power on after power outage ) or similar, find it and enable it.
Take the Dell motherboard as an example:
Enter the power management settings - AC Recovery is set to: On. 
Take Lenovo motherboard as an example:
Enter Power-After Power Loss is set to: Power On. 
Take ASUS motherboard as an example:
Enter Advanced - Advanced Power Management (APM), set the power state to: Power On. 
Take GIGABYTE motherboard as an example:
Enter power management - AC BACK is set to: Always On. 
Note: If you are not sure whether the motherboard BIOS supports the AC Recovery function, please contact the motherboard manufacturer directly to confirm.